Seven Things You Didn't Know About Asphalt Paving Leander, TX

Seven Things You Didn’t Know About Asphalt Paving

Asphalt is the most commonly used type of paving material in the United States, and for good reason. It’s durable, long-lasting, and relatively inexpensive. However, there’s more to asphalt paving than just covering up a dirt road or filling in a pothole. Here are seven things you probably didn’t know about asphalt paving.

Asphalt is made from petroleum

Asphalt is a composite material that is made from petroleum. The petroleum is combined with other materials to create a sticky, black substance that is used for paving roads and parking lots. The history of asphalt paving dates back to the 1800s when it was first used to surface roads in France. In the United States, asphalt pavement was first used in the early 1900s. Asphalt is now the most common type of pavement in the world, and it is used to pave over 1 million miles of road every year. 

There are several advantages to using asphalt pavement. It is strong and durable, and it can withstand heavy traffic loads. Asphalt also has a high melting point, so it can be used in cold climates. Additionally, asphalt is relatively inexpensive to install and maintain. Despite its many benefits, asphalt has some drawbacks. One downside is that it can be damaged by hot weather or by vehicles driving over it too fast. Additionally, asphalt can be smelly and messy to work with.

Asphalt has been used for centuries

Asphalt has been used for centuries as a paving material. It’s durable, relatively inexpensive, and easy to install. But what is asphalt, and how is it made? Asphalt is a type of petroleum-based sealant that is used to pave roads, parking lots, and other outdoor surfaces. It is made by combining bitumen (a type of crude oil) with aggregate (such as sand or gravel). The resulting mixture is then heated until it liquefies, and poured onto the surface to be paved.

Asphalt has several advantages over other paving materials. It is durable, meaning it can withstand heavy traffic loads without breaking down. It is also relatively inexpensive, and easy to install. However, asphalt does have some disadvantages. It can be difficult to repair if it becomes damaged, and it can be slippery when wet.

There are two types of asphalt

Asphalt is a material that is used to pave roads, parking lots, and other areas. There are two types of asphalt: hot mix and cold mix. Hot mix asphalt is made by heating aggregate (a type of rock) and bitumen (a type of oil) until they are molten. The molten material is then mixed together and poured into molds to cool and form asphalt pavement. Cold mix asphalt is made by combining aggregate and bitumen in a small batch plant. The mixture is then put into a truck and transported to the job site.

Cold mix asphalt can be used for repair work or for new construction projects. Both types of asphalt have their own advantages and disadvantages. Hot mix asphalt is less expensive to produce than cold mix asphalt, but it can only be used in warm weather because the material needs to be heated in order to work properly. Cold mix asphalt is more expensive to produce, but it can be used at any temperature.

Asphalt can last for decades or even longer

Asphalt TX

When it comes to driveway materials, asphalt is a popular choice. Not only does it look good, but it also lasts for a long time. Asphalt can last for decades or even longer with proper maintenance. If you’re considering installing an asphalt driveway, be sure to talk to your contractor about the different maintenance options. Some different sealants and coatings can be applied to protect your driveway from the elements.

Regularly sweeping and cleaning your driveway will also help keep it looking its best. And if you ever notice any cracks or potholes, be sure to have them fixed right away. With proper maintenance, an asphalt driveway can last for many years – even decades! So if you’re looking for long-lasting driveway material, asphalt is a good option.

You can recycle your old asphalt pavement

Asphalt pavement is made of a variety of materials, including sand, stone, tar, and gravel. And when it’s time to rebuild or resurface a road, that old pavement can be recycled and used to create a new surface. Recycled asphalt pavement is cheaper and easier to produce than new asphalt, and it has the same properties as new asphalt.

In fact, recycled asphalt can even be used to create new roads and parking lots. In addition to being environmentally friendly, recycling old asphalt pavement is a great way to save money on your next construction project. And there’s no need to worry about the quality of the recycled asphalt it will perform just as well as new asphalt.

There are many benefits to using asphalt over other paving materials

Asphalt pavements are durable and can withstand heavy traffic without breaking down or cracking over time unlike concrete pavements prone to cracking under heavy loads. Asphalt pavements are also much less expensive than concrete pavements. Properly maintained through regular seal coating and crack-filling, asphalt pavement will resist damage from water penetration unlike concrete pavements, which are porous and absorb water.

Asphalt pavements offer better traction than concrete pavements, making them ideal for areas that experience winter weather conditions like snow and ice. Finally, an essential benefit of using asphalt over concrete is that any necessary repairs are usually much less disruptive than repairs to concrete pavements since they can be patched rather than replaced entirely.

You need special equipment to lay an asphalt pavement

Asphalt pavement is a great way to improve the look and functionality of your driveway. However, it’s essential to know that some specialized equipment is required to lay this type of pavement. You’ll need a large tarp or canvas to protect your lawn or garden from the hot asphalt. You’ll also need a large pump sprayer to apply the asphalt sealant. And finally, you’ll need a paving machine to lay the asphalt. Once you have all the necessary equipment, it’s time to start your project!

First, using the pump sprayer, you’ll need to spread the asphalt sealant over the driveway’s surface. Once the sealant is applied, you can start paving. If you’re unsure how to use the paving machine, consult the manufacturer’s instructions before starting. Be sure to wear gloves, goggles, and a dust mask while paving, as the fumes from the asphalt can be dangerous. Pave in small sections simultaneously, ensuring each area is even before moving on to the next. Once all units are paved, allow the pavement to cool for several hours before driving on it.


There are many benefits to asphalt paving that you may not know about. For one, it is a very durable and long-lasting material that can be used for driveways, parking lots, and even roads. Additionally, asphalt paving is often more affordable than other materials like concrete. Finally, asphalt paving can be installed relatively quickly and doesn’t require as much time to cure as concrete does. If you’re considering having your driveway or parking lot paved, be sure to consider asphalt as a viable option!

Bennett Paving is a trusted and experienced asphalt paving company that can provide you with the best possible service for your needs. We have been in business for many years and have a reputation for quality workmanship and customer satisfaction. Contact us today at 512-740-8603 for a free consultation!